FanRoll Enamel Pins FAQ: Beholder, Tiger d20 and Baby Goblin
By FanRoll by Metallic Dice Games | Published: 2026-11-04
Category: مراجعات المنتجات
Get clear answers about FanRoll's hard enamel pins, including the Beholder, Tiger d20, and Gen Con 2025 Baby Goblin, so you can buy and display with confidence.
Quick answer
FanRoll's hard enamel pins are 2-inch collectibles with durable rubber backs, and the Beholder, Tiger d20, and Baby Goblin designs each offer a distinct way to show off your gaming fandom. Choose based on the motif you like and whether you want a convention memento.
Why hard enamel matters for a pin you actually wear
Hard enamel pins are polished flat, so the surface is smooth and the colors sit flush with the metal lines. That makes them less likely to snag on fabric compared with soft enamel pins, which have recessed color areas. For a pin that goes on a backpack, jacket, or lanyard, the smoother finish is a practical advantage.
The tradeoff is that hard enamel can look slightly more formal or glossy than soft enamel, which some collectors prefer for a chunkier, textured feel. If you want a pin that feels solid and resists daily wear, hard enamel is the safer bet.
How to choose between the three designs
The Beholder and Tiger d20 pins come from FanRoll's in-house artist series and share the same 2-inch size and rubber backing. Pick the Beholder if you like classic monster imagery, or the Tiger d20 if you want a dice-themed pin that reads clearly as tabletop gaming. The Baby Goblin pin is a Gen Con 2025 commemorative piece, so it suits anyone who attended the show or collects convention exclusives.
Because the Beholder and Tiger d20 are part of an ongoing collectible series, they may be easier to find later than a year-specific event pin. If you want a matching set, start with the series pins; if you want a memory of Gen Con 2025, the Baby Goblin is the one to grab.
What the catalog doesn't tell you
The product listings do not specify the exact metal type, pin clasp style beyond the rubber backing, or whether the pins are limited editions. Those details are not supplied, so treat them as unknown rather than assuming. For display or gifting, the 2-inch size and rubber backing are the main practical facts you can rely on.
FanRoll enamel pin FAQ
- Are FanRoll enamel pins hard or soft enamel?
- The Beholder and Tiger d20 pins are hard enamel, which means the color areas are filled flush with the metal for a smooth, polished surface. The Baby Goblin pin's enamel type is not stated in the catalog, so don't assume it matches the series without checking the listing. If a smooth finish matters to you, confirm the enamel type on the specific pin before buying.
- How big are the pins?
- The Beholder and Tiger d20 pins are approximately 2 inches across. That's large enough to be seen clearly on a backpack or denim jacket without being oversized. The Baby Goblin pin's size is not listed, so treat it as unknown until you see the product page. Measure your intended spot if you plan to group several pins together.
- What keeps the pin from falling off?
- The Beholder and Tiger d20 pins use a durable rubber backing, which grips the pin post and is less likely to slide off than a simple metal butterfly clutch. The Baby Goblin pin's backing type is not specified in the catalog. For high-movement use, check that the backing is rubber or locking before you wear it.
- Is the Baby Goblin pin a limited edition?
- The catalog calls it a commemorative Gen Con 2025 pin but does not state a production run or limited-edition status. If you want it as a memento, buy it when you see it rather than waiting for a restock that may not come. Event pins often disappear after the convention season, so don't delay if it's a must-have.
- Can I collect all three as a set?
- Yes, the Beholder and Tiger d20 are part of FanRoll's in-house artist series, and the Baby Goblin is a separate Gen Con 2025 commemorative pin. They share a gaming theme but are not sold as a single set in the catalog. Buying them individually lets you start with the design you like most.
Product facts at a glance
- FanRoll Collectible Hard Enamel Pin: Tiger d20: Hard enamel pin, approximately 2 inches, with a durable rubber backing. The 2-inch size is large enough to stand out on a bag or jacket, and the rubber backing helps keep it secure during everyday wear.
FanRoll Collectible Hard Enamel Pin: Tiger d20 - FanRoll Collectible Hard Enamel Pin: Beholder: Hard enamel Beholder pin, approximately 2 inches, with a durable rubber backing. A smooth, flat finish makes this pin comfortable to wear and less likely to catch on fabric than a soft enamel pin.
FanRoll Collectible Hard Enamel Pin: Beholder - Gen Con 2025 Baby Goblin Pin: Commemorative Gen Con 2025 Baby Goblin pin produced by FanRoll. It works as a convention memento or a collectible for anyone who wants a year-specific pin that won't be repeated.
