Start with what makes these dice different
Rainbow Aegis dice are a molded acrylic set electroplated with a durable aluminum shield. That construction gives you the lightweight feel and utility of resin dice with the look of metal, but it also means the outer layer is a thin metal coating over a plastic core. Care routines that work for solid metal dice or bare acrylic dice are not automatically right here.
The set includes seven full-sized 16mm dice: d4, d6, d8, d10, d10% (00-90), d12, and d20. Each die has white numbers, and keeping those numbers crisp is mostly about preventing abrasion and buildup on the plated surface.
Rainbow Aegis at a glance
- Rainbow Aegis w/ White Numbers 16mm Aluminum Plated Acrylic Poly Dice Set: Rainbow Aegis Dice are a molded acrylic set, electroplated with a durable aluminum shield. The acrylic core and aluminum plating are the two materials your care routine needs to respect.

Rainbow Aegis w/ White Numbers 16mm Aluminum Plated Acrylic Poly Dice Set - Rainbow Aegis w/ White Numbers 16mm Aluminum Plated Acrylic Poly Dice Set: Each full-sized, 16mm set comes with 7 dice (d4, d6, d8, d10, d10% (00-90), d12, and d20). Knowing the full set helps you store and check all seven dice together, so none get lost or scratched loose in a bag.
A simple cleaning routine for plated acrylic dice
The supplied product information does not include manufacturer cleaning instructions, so the following is general, conservative guidance for plated acrylic dice rather than a verified brand procedure. Test on one die first and stop if you see any change in the finish.
- Work over a soft surface: Clean dice over a towel or in a shallow bowl so a dropped die does not hit a hard counter or sink.
- Use a barely damp cloth: Wipe each die with a soft, lint-free cloth that is only slightly damp. Avoid soaking or running water, which can trap moisture around the plating edge.
- Skip harsh cleaners: Do not use abrasive pads, scouring powders, or strong solvents. A mild soap solution on the cloth is enough for normal hand oils and dust.
- Dry immediately: Buff each die dry with a clean cloth right away. Letting water sit on the plated surface or near the numbers is the easiest way to invite dull spots.
- Check the numbers: After cleaning, look at the white numbers under good light. If they look cloudy, repeat with a clean damp cloth rather than scrubbing harder.
Handling habits that protect the plating
The aluminum shield is described as durable, but it is still a plating over acrylic. Small habits make the biggest difference over months of play.
- Roll on a padded surface: A padded dice tray cushions impacts and keeps dice from bouncing onto hard tables or floors. The catalog explicitly points to padded dice trays as a companion for this set.
- Keep dice away from keys and coins: Loose metal in a pocket or bag can abrade the plated finish and the white numbers. Give Rainbow Aegis its own compartment.
- Avoid dropping dice on concrete or tile: A hard floor is the most likely place for a plated edge to chip or scuff. Roll over a tray or a cloth mat instead.
- Don't stack heavy objects on them: Long-term pressure and rubbing in a crowded bag can wear the plating. Store dice loosely or in individual slots.
Storage that keeps numbers legible
White numbers on a plated surface stay readable when the surface stays clean and unscratched. Storage is where most accidental wear happens.
- Use a padded dice tray or divided bag: A tray with soft lining or a bag with separate compartments prevents dice from grinding against each other. The catalog recommends padded dice trays alongside this set.
- Keep the set together: Store all seven dice in one place so the d4 or d10% does not end up loose in a backpack with keys.
- Avoid tight plastic tubes: If a tube or box presses hard on the dice, the plating can rub against the container. Choose a container with a little room to spare.
- Store dry: Put dice away only after they are fully dry. A sealed container with residual moisture can dull the finish over time.
What the supplied information does not cover
The catalog does not list a manufacturer cleaning solution, polishing method, or warranty for the plating. It also does not state a safe temperature range or chemical resistance. Treat any unfamiliar cleaner or soak as a risk, and when in doubt, stick to a soft damp cloth and immediate drying.
If you notice a change in the finish that does not come off with gentle wiping, contact the store rather than trying more aggressive methods. The goal is to preserve the aluminum shield and the white numbers, not to restore them with abrasives.


