Liquid Core Dice Care: Keep Sorcerous Swirl Dice Clear
By FanRoll by Metallic Dice Games | Published: 2026-10-13
Category: 技巧與保養
Keep your Elixir liquid core dice swirling clean and clear with a simple five-step routine: gentle washing, safe drying, smart storage, and a few habits to avoid.
Quick answer
Clean liquid core dice with lukewarm water, a drop of mild dish soap, and your fingertips, then pat them dry with a soft cloth. Skip alcohol, acetone, and hot water, and store the set away from direct sun and heat. That routine keeps the glittery liquid inside your Sorcerous Swirl dice swirling and the sharp resin edges intact.
Why liquid core dice need a gentler routine
Elixir dice are handcrafted and polished to keep their sharp edges, and the liquid core is molded inside the resin. Because the core is sealed during molding, the outside is what you actually clean. Heat and harsh solvents are the two things most likely to dull the polished surface or stress the seal over time, so the goal is to remove hand oils and table grime without either. A small bubble forms inside the liquid during molding; it moves as you roll and is normal, not a cleaning problem.
What to keep away from your Elixir set
Alcohol wipes, acetone, ammonia-based glass cleaners, and ultrasonic jewelry cleaners are all overkill for resin. Hot water is the other common mistake: it can soften the polished surface and is unnecessary because room-temperature water lifts fingerprints fine. If a die has a stubborn smudge, a slightly longer soak in mild soapy water does more than scrubbing harder.
Five-step liquid core dice care routine
- 1. Wash with lukewarm water and a drop of mild soap: Fill a bowl with lukewarm water, add one drop of mild dish soap, and rub each die between your fingertips. Don't scrub with a brush or scouring pad. Checkpoint: the water should feel neutral on your wrist, never hot.
- 2. Rinse and pat dry immediately: Rinse under lukewarm running water, then pat each die dry with a soft microfiber or cotton cloth. Don't leave the set sitting wet in a bowl. Mistake to avoid: air-drying on a hard counter leaves water spots on the polished resin.
- 3. Store away from heat and direct sun: Return the set to a padded dice tray or a soft bag, and keep it out of a hot car, a sunny windowsill, or next to a radiator. Checkpoint: if the storage spot feels warm to the touch, it's too warm for resin.
- 4. Roll on a padded surface, not bare tables: Use a padded dice tray for both liquid core and metal dice. Metal dice in the same tray can chip the resin edges of your Elixir set, so roll them separately. Mistake to avoid: tossing a full set into a hard plastic box for transport.
- 5. Spot-clean between full washes: For fingerprints or light table grime, a damp cloth with plain water is enough. Save the soapy wash for when the dice actually feel tacky or visibly dirty. Next step: if a die ever looks cloudy inside the core rather than on the surface, stop cleaning and contact the maker rather than trying to polish it out.
Product facts that shape your care routine
- Elixir Liquid Core Dice Set: Sorcerous Swirl: Elixir dice are infused with glittery liquid cores that swirl when rolled, and each set is handcrafted and polished to keep sharp edges. The polished resin surface and sealed liquid core are the two parts your cleaning routine has to protect, so gentleness matters more than scrubbing power.
- Elixir Liquid Core Dice Set: Sorcerous Swirl: A small bubble forms in the liquid core during molding, and because it moves constantly it has not been seen to affect rolling. A moving bubble is normal, so don't treat it as damage or try to 'fix' it by opening, heating, or soaking the die.
- Pearl Dice Gradient Purple/Teal/White w/ White Numbers 16mm Resin Poly Dice Set: This resin polyhedral set is infused with pearls and comes with 7 dice in a 16mm size. If you also own pearl resin dice, the same mild-soap routine works for them, so you can clean a mixed dice bag in one pass.
- Rainbow with Blue Enamel 16mm Polyhedral Dice Set: This 16mm metal set is made of solid zinc plated with polished nickel, and rolling metal dice on padded surfaces is recommended. Keep metal dice separate from liquid core dice during cleaning and rolling so the heavier metal doesn't chip the resin edges.
